Skateboards are usually a bit slower than a bike. But there are several things here, how fast a skateboard or bike will move forward or whether it can go at the same speed depends a lot on a rider’s experience, riding surface, equipment type, external factors, and other characteristics.

In today’s full article, I will converse with you about the speed of bikes and skateboards. Additionally, I will discuss multiple types of differences between these two things, including comparison charts, top speed details, and other topics. That’s why without further delay, keep reading the article and know many hidden facts.

How Fast Can Skateboards Go?

In general, the average speed of a skateboard can range from about 5 miles per hour to 12 miles per hour. But an experienced skateboarder can regularly skateboard at speeds of around 8 mph or more.

  • How fast you can move forward depends on the type of surface you are riding on.

It is also said that the speed depends a lot on the terrain, skateboard bearings, wheel diameter, weight, total setup, and besides the skill level, the experience of the rider.

  • If you’re starting to go downhill with a tailwind, you can easily hit the front at 20 mph or more.
  • Even with the light setup, it’s possible to go 30 mph+, if you’re an experienced rider.

Of course, all of these motions are completely dependent on what type of surface you’re skating on.

  • When you skate on rough or slippery surfaces, you are more likely to slow down.

Speed At Smooth Concrete Or Asphalt-type Track:

However, when skating on different types of smooth concrete or asphalt-type areas, will allow you to travel at high speeds with relative comfort. But again, on most skateboards, you’ll be able to cruise anywhere from about 10 mph to 15 mph without too much trouble.

Professional skateboarders may be able to reach speeds of around 50 miles per hour or more on closed courses with smooth asphalt surfaces.

A Short Chart Of Skateboard Speed On Various Surfaces:

Below are some real-life examples of an average skateboard speed recorded and accurately measured by professional skateboarders at this point in the article in tabular form. Through this, you can easily get a special idea about how fast the skateboard can go in different kinds of areas.

Surfaces & Skateboarding Average Speed Of A Skateboard
More than 10 miles on a Flat Space 5 mph To 8 mph
7 Miles of reasonable cruising with large soft & fluffy wheels 7 mph
Relatively skilled skateboarder, skating with smooth wheels 7.5 mph
Heavy lifting with new quality full skateboard bearings  7.5 mph To 12 mph
Manageable to push on a longboard  8 mph To 9 mph
2 Miles of short commutes with a skateboard  8 mph To 12 mph
UC Davis typical skateboard speed observances 9.7 mph

Few Top Skateboarders Speeds:

  • Rodney Mullen: 40 mph
  • Tony Hawk: 55 mph
  • Danny Way: 65 mph
  • Shane O’Neill: 70 mph
  • Ashworth: 7 mph

And, How Fast Can A Bicycle Go?

Those who are professional cyclists can typically achieve a maximum speed of 45-MPH on a bicycle. But in this case, they use only raw power and ride upwind on the upper sides of the road.

Riders who are untrained can ride a bicycle at speeds ranging from about 10 miles per hour (MPH) to about 14 miles per hour (MPH).

  • After a few weeks of training, riders may be able to start at around 15 MPH and reach 20 MPH.
  • Again, when you train hard for a few weeks to a few months, your riding speed can increase a lot. At that time the riding speed is more likely to increase to about 25 MPH or even 30 MPH.

Generally, how fast you can move a bicycle forward depends on your riding skills. The more skills you develop, the more experience you gain, and the faster you can move forward. And, besides that your riding speed will be constantly increasing.

👉 Pro Bikers Speed Analysis:

Those who are professional cyclists or racers have thus made themselves more experienced through constant training. That is why the riding speed of a professional cyclist is much higher than that of an ordinary bicycle rider.

  • As in 1996, Bruce Bursford set the world record by giving us the fastest bicycle riding at a top speed of 207.9 MPH.
  • Then, there’s Todd Reichert, who holds the world record for riding an unconventional bike. He was able to achieve a top speed of 82 MPH using only his leg power.

It can also be seen that the official record for cycling in a particularly conventional upright position in perfectly fair conditions was 82 km/h, about 51 miles or more than about 200 meters.

  • YES, how fast you can ride a bicycle depends on the location, riding experience, type of bicycle, skill, different equipment, etc.

Table Of Average Speed Depending On Bikers Level:

Rider’s Type  Average Speed
Newcomer Cyclist 8 mph To 12 mph (13 To 19 km/h)
Untrained Person 10 mph To 14 mph
Intermediary Cyclist 12 mph To 16 mph (19 To 26 km/h)
After a Few Weeks of practice 15 mph To 20 mph
Avant-garde Cyclist 16 mph To 24 mph (26 To 39 km/h)
After a few Months Of strong factors 25 mph To 30 mph
Experienced Cyclist 24 mph To 45 mph

(39 km/h+)

Average Global Cyclists Speed:

  • Men:7 mph Or 22.04 km/h
  • Women:1 mph Or 19.47 km/h
  • Global Average:5 mph Or 21.72 km/h

Few Top Bicyclists Speeds:

  1. Denise Mueller-Korenek: 009 km/h Or 183.932 mph (2018)
  2. Eric Barone:
  • 22 km/h Or 138.08 mph (2000)
  • 3 km/h Or 138.8 mph (2015)
  • 72 km/h Or 141.50 mph (2017)
  1. Markus Stöckl:
  • 4 km/h Or 130.7 mph (2007)
  • 6 km/h Or 104.1 mph (2017)
  1. Todd Reichert: 17 km/h Or 89.58 mph (2016)
  2. Ilona Peltier: 52 km/h Or 78.62 mph (2019)

Well Then, Can A Skateboard And A Bike Go At The Same Speed?

No, a skateboard and a bike can’t go at the same speed.

There are many types of speed differences between these two. In general, it can be said that the speed of a skateboard and a bike depends on the type of surface being ridden on, the rider’s skill, experience, external factors, and various criteria. Bikes can be easily accelerated or decelerated by pedaling, but skateboards can’t.

  • When a rider completes the riding by bike, covering a distance of 4 km in about 2 to 3 minutes at a speed ranging from 15 mph to 20 mph.
  • And when a passenger is skating via skateboard, the same distance can be covered in about 4 minutes to 5 minutes, with average speeds ranging from 8 mph to 12 mph.

Thus you surely understand the difference in speed between a bike and a skateboard.

Also, understand that a bike can move forward faster than a skateboard, give you another example.

  • It may take 10 to 15 minutes to get to a school located about 2 miles away if the speed of the skateboard is 8 mph to 12 mph. If an average commuter who uses the bike for commuting rides it at a speed of 20 to 25 miles per hour every day, that translates to about 30 to 40 km/h.

This means that the speed of a skateboard and a bike is not the same, the bike always can move slightly faster than the skateboard.

However, in some cases, the speed of skateboards and bikes may vary depending on various criteria such as special skills, handling methods, various external factors, riding space, etc. But it is sure that both skateboards and bikes can give you a lot of pleasure in riding. Besides that, you can develop your skills to reach the maximum speed limit.

Vital Differences Between Skateboard And Bicycle

Major Factors Skateboard Bicycle
Safety Can’t provide better safety Can provide better safety because it has brakes & paddle for smooth speed
Terrain Or Surface Perfect for skatepark & smooth surface Perfect for any type of smooth surface and also rough terrain, off-road area, uphill, steep downhill
Difficulty Little hard than a bike Easy to ride
Fun Element Perfect for more fun-loving people A bike also provides a fun but is less than a skateboard
Convenience Portable Stuff carrying
Exercise Can get more energy when skating Bicycles are also nice for exercise
Cost Lower cost, less maintenance Costly

So, Can I Ride Skateboard & Bike At The Same Place?

Generally speaking, skateboarding and cycling are basically opposites.

  • Skateboards are mostly compact and cheap, but also slow and somewhat unstable.
  • On the other hand, bikes are much more efficient and capable but they are bigger. Experience and surface play a huge role in skateboarding. Although skateboarding is a little more dangerous than cycling, if you have the right experience, you can skate comfortably on most surfaces.

All over the world, there are special skateparks for skating. And, these areas are specially designed for skating.

When you slide in a skatepark, it will not be dangerous at all, but you can easily complete the skating. From beginners to professional riders in today’s world skating in the skatepark, constantly developing many skills and increasing speed.

  • Many riders enjoy riding bikes in skateparks, especially cruiser bikes or racing bikes can be ridden very well in the skatepark and it is possible to take different stunts.

Furthermore, most bicycles can run on different types of off-road areas, hilly roads, gravel paths, and dirt roads. But the skateboards will never be able to move comfortably in this kind of dirty place.

  • While it is possible to skate comfortably with clean bike lanes, it is very difficult to slide on different types of uphill, and downhill areas, gravel paths, etc.
  • But Cyclists can easily cycle in areas where skating is done, such as various types of skateparks, smooth roads, elevated designed roads, etc.

All this above discussion means that you can ride a bicycle and skateboard simultaneously in some areas. Although it is possible to ride bicycles in almost all areas, skateboards are somewhat difficult to ride. So, skateboarding is not possible everywhere.

Final Words

I hope after reading today’s complete article, you know about the speed related and other differences between skateboards and bikes. Moreover, I really wish that you can have a lot of fun playing with these two things. But choose any of them according to your riding preferences, surfaces, tracks, and skills.

Spread The Love 👍